Description
Documentation
Description
- External GLONASS/GPS and GSM antennas
- Built-in 800 mA Li-Po battery/ h
- 3G/4G modem
- 2 SIM cards
- Supports up to 32GB SD cards
- Power and line protection up to 200V
- 6 universal input lines
- 4 control output lines
- Interfaces: RS-232, RS-485, CAN and 1-Wire
- MODBUS support
- Bluetooth 4.0
Specifications GLONASS tracker SIGNAL S-4651
| GSM/GPRS/Bluetooth | |||
| S-4651x-(M)* | |||
| Frequency ranges | LTE (4G) | A | LTE-FDD B2/B4/B12 |
| SA | LTE-FDD B1/B3/B5/B7/B8/B28 | ||
| E | LTE-FDD B1/B3/B7/B8/B20 | ||
| WCDMA (3G) | A | BAND2/BAND5 | |
| < strong>SA | BAND1/BAND5 | ||
| E | BAND1/BAND8< /td> | ||
| GSM (2G) | A | none | |
| SA | none | ||
| E | 900/1800 MHz | ||
| Category | CAT1 | ||
| TCP, UDP | |||
| Transmitter power | LTE power class: 3 (0.25W). UMTS power class: - WCDMA: 3 (0.25 W). EDGE power class (S-4651E and S-4653E only): - EGSM900: E2 ( 0.5W); - DCS1800: E1 (0.4W). GSM/GPRS power class (S-4651E and S-4653E only): - EGSM900: 4 (2W); - DCS1800: 1 (1W). | ||
| Maximum data transfer/reception rate (LTE), Mbps | 5 / 10 | ||
| Maximum data transfer/reception rate (WCDMA), Kbps | 384 / 384 | ||
| Maximum data transfer/reception rate (GPRS/EDGE), Kbps | 236.8 / 236.8 only in S-4651E-(M) | ||
| Number of SIMs used | 2 | ||
| SIM holder 1 | external with ejector (Molex), miniSIM | ||
| SIM card holder 2 | internal, nanoSIM | ||
| SIM chip1 | 2 | ||
| Bluetooth | Yes, v.4.0 | ||
| GNSS | |||
| Supported navigation systems | GLONASS/GPS/Beidou | ||
| Number of channels | accompanying: 33, gripping: 99 | ||
| Sensitivity (lab) | tracking: -165 dBm cold start: -148 dBm | ||
| Time of first position fix (for GPS and GLONASS systems at -130dBm signal) | cold start: <35 sec warm start : <30 sec hotstart: <1 sec | ||
| Coordinate determination error (50% CEP, in static mode for 24 hours, at signal levels of -130 dBm) no more than, m | 2.5 (plan), 5 (height) | ||
| Error in determining the speed, no more than, m/s | 0,1 | ||
| Coordinate update frequency, at least, Hz | 1 | ||
| Food | |||
| Operating supply voltage, V2 | 9.5…47 | < /tr>||
| Protection against high-voltage ripples and prolonged overvoltage up to 200 V | yes | ||
| Average current consumption at 12 V in operating mode, mA | 80 | Consumed current at 12 V with GLONASS and GSM modules off, with battery charged, no more than, mA | 30< /td> |
| Maximum current consumption at a voltage of 12 V in operating mode when charging the built-in battery, on average3, mA | 200 | ||
| Reverse polarity protection when external power is connected | Yes | ||
| Built-in battery4 | Type: Li-PoRated voltage: 3.7 V,Capacity : at least 800 mAh | ||
| The presence of built-in battery protection against overcharging, full discharge, short circuit5 | Yes | ||
| Maximum time of continuous operation of the device from a fully charged built-in battery in the mode of data transfer via GSM/UMTS channel once per minute, at least, h | 6 | ||
| Time to fully charge the built-in battery, no more than, h | 5 | ||
| RTC clock and navigation module backup battery present | Yes | ||
| Time to save the RTC clock and ephemeris in the navigation module (when the power is off and the built-in battery is discharged) at least days | 5 | ||
| Charging the built-in battery via USB | Yes | ||
| Input lines | |||
| Input line surge protection, V | up to 200 | ||
| Total number of universal (analog, discrete, pulse-frequency) input lines | 6 | ||
| Number of pulse-frequency input lines used to connect frequency FLS or count rectangular pulses | up to 6 (as part of universal ones) | ||
| Measured frequency range (for meander signal) for working with frequency FLS, Hz | 1 – 3000 | ||
| Number of analog input lines configured as discrete | up to 6 (universal included) | ||
| Measuring range of input lines configured as analog B | 0…31 | ||
| Built-in pull-up resistor (PULL UP) for discrete inputs | Yes | ||
| Output lines | |||
| Number of open collector control output lines | 4 | ||
| Maximum switching current by output control lines, mA | 500 | ||
| Maximum switching voltage by output control lines, V | 48 | ||
| Interfaces | |||
| USB interface for settings, control, data transfer and diagnostics | Yes | RS-485 digital interface | Yes |
| RS-232 digital interface | Yes | ||
| Number of digital CAN interfaces | 1 | ||
| 1-Wire Interface | Yes | ||
| Device storage | |||
| NVRAM, MB | 8 | ||
| Number of records in non-volatile memory (by type of ring buffer) with a telematic record packet size of less than 127 bytes | up to 51700 | ||
| Period of data recording in internal storage, c | 1 — 3600and/or upon event | ||
| Supports microSD cards up to 32GB | Yes | ||
| Function for recording telemetry to a microSD card | Yes | ||
| Number of telemetry records on the microSD card | at least 2,000,000 per 1 GB | ||
| Accelerometer | |||
| Accelerometer with built-in customizable soft/high impact, displacement and tilt sensors | Yes | Range of measured accelerations, g | +/-24 |
| Acceleration measurement error in the +/-24g range is not worse than % | 0,5 | ||
| Calibrating the accelerometer using information from the GLONASS/GPS module during normal vehicle movement | Yes | ||
| Setup and control | |||
| USB interface for settings, control and data transfer | Yes | ||
| Configuring the device using the NTC Configurator | Yes | ||
| Update firmware and change settings via GPRS | Yes | ||
| Available automatic firmware update | Yes | ||
| Ability to change settings via SMS | Yes | ||
| Ability to control via GPRS, SMS and DTMF | Yes | ||
| Data Transfer | |||
| Ability to transmit data via GSM via SMS, GPRS channels | Yes | ||
| Optional choice of parameters to be passed to save traffic | Yes | ||
| The ability to send roaming information only about the current state on the set timers in motion and at a stop, with the subsequent unloading of all accumulated data on the home network | Yes | ||
| Possibility to customize the list of priority operators in roaming | Yes | ||
| Automatic detection of operator settings based on registration data of the SIM card in the GSM network | Yes | ||
| EGTS protocol support | Yes | ||
| Support for custom FLEX and FLEX 2.0 protocols | Yes | ||
| FLEX 3.0 custom protocol support | Yes | ||
| Number of servers (IP addresses) to which telemetry information can be simultaneously transmitted | 3 | ||
| Ability to send telemetry data to the server repeatedly by SMS or GPRS request for a period | Yes | ||
| Output user and debug logs from GSM modem, GPS receiver and interfaces | Yes | ||
| TCP and UDP data transfer capability | Yes | ||
| Number of subscribers for SMS alert | 5 | ||
| Functions | |||
| EcoDriving Function | Yes | ||
| Yes | |||
| The function of fixing an accident event according to GOST or the ASI accident severity index | Yes | ||
| Generate and send the RTA profile file to the server | Yes | ||
| Immobilizer function using Proximity card driver identification system and 1-Wire interface | Yes | ||
| Programmable power saving mode with the ability to disable GLONASS/GPS and GSM modules | Yes | ||
| Ability to operate the device by timer and calendar | Yes | ||
| Armed Mode | Yes | ||
| Yes | |||
| GNSS jamming detector | Yes | ||
| Ability to send SMS on overspeed event | Yes | ||
| Determination of the fact of engine operation and calculation of engine hours by the nature of the voltage in the vehicle's on-board network | Yes | ||
| Select sensors used to calculate engine hours | Yes | ||
| Tachometer function with rpm count | Yes | ||
| Ability to provide LBS information from the three nearest cell towers | Yes | ||
| Ability to encrypt data according to the AES128 standard when transferring it to the server | Yes | ||
| Algorithm for measuring real mileage taking into account the terrain | Yes | ||
| Select sensors to average coordinates over | Yes | ||
| Ability to adjust the degree of data averaging for all inputs configured for FLS | Yes | ||
| Ability to stop working with fuel sensors under specified conditions (supply voltage drops below the threshold, ignition off, engine shutdown) | Yes | ||
| Customizable behavior of output lines (permanent, single, periodic) | Yes | ||
| Connecting a digital fuel level sensor with a digital RS-232 interface | Yes | ||
| Maximum number of connected LLS digital fuel level sensors via RS-485 interface | 16 | Possibility of calibrating LLS LLS in the device | Yes |
| Possibility of simultaneous operation on RS-485 interface of FLS (LLS) and tachographs (Shtrikh, Mercury, Atol) | Yes< /td> | ||
| MODBUS RTU protocol support | Yes | ||
| Ability to work with RFID readers "Escort" ("Radius", "Mielta", "ADM20" and LLS compatible | Yes | ||
| The ability to output NMEA strings from the navigation module via the RS-485/RS-232 digital interface | Yes | ||
| CAN interface supporting J1939 | Yes | ||
| Support for CAN protocols other than J1939 by decoding files | Yes | ||
| Parse CAN parameters according to user settings | Yes | ||
| Ability to work with J1708 standard CAN buses on RS-485 interface | Yes | Support for CAN-LOG and CANFMS CAN adapters | Yes |
| DTA-CAN adapter support | Yes | ||
| Ability to connect a wireless headset via Bluetooth for two-way communication with the driver | Yes | ||
| Ability to connect via Bluetooth up to 4 wireless FLS, ESCORT TD-BLE, TECHNOTON DUT-E, GL-TV | Yes | ||
| Ability to connect via Bluetooth up to 4 wireless temperature and humidity sensors ADM31, ESCORT TL-BLE | Yes | ||
| Ability to connect wireless tilt sensors ADM32 via Bluetooth | Yes | ||
| Ability to connect wireless axle load sensors TECHNOTON GNOM DDE via Bluetooth | Yes | ||
| Ability to connect wireless fuel consumption sensors TECHNOTON DFM via Bluetooth | Yes | ||
| Ability to connect ELM327 diagnostic adapter via Bluetooth | Yes | ||
| Transparent Port Mode7 | Yes | ||
| Upload ddd-files from tachographs "Shtrikh", "Mercury", "VDO Continental", "Atol"8 | Yes | ||
| Sending tachograph status events | Yes | ||
| Ability to connect DV-01 driver display | Yes | ||
| Ability to display text messages received from the server or via SMS on the DV-01 driver's display | Yes | < /tr>||
| Built-in autoinformer function | Yes | ||
| Support for work with "ITLINE" and "Integral" route indicators | Yes | ||
| Ability to display information about the current route, current and next stop on the DV-01 driver's display when the Autoinformer function is running | Yes | ||
| The presence of a built-in function for monitoring compliance with speed limits by geofences | Yes | ||
| Ability to display the set speed limit and speeding warnings on the DV-01 driver's display | Yes | ||
| Ability to display information on the amount of fuel in liters from 4 LLS FLS | Yes | ||
| Possibility to connect passenger flow meters «PP-01» and "AutoConductor" | Yes | ||
| Support for connecting a camera, sending pictures to the server upon server request | Yes | ||
| Ability to use information from tire pressure sensors "Pressure Pro", "TPMS 6-13" (from Parkmaster), B-Tag (from "Bridgestone"), TM508T22U and "TD 18, 20, 21" | Yes | Alcogran AM-525 alcolock support | Yes |
| Interface for connecting digital temperature sensors | 1-Wire | ||
| Maximum possible number of connected digital temperature sensors |
Documentation
Add to Shopping Cart
| ||
